How To Set Intertek Alarm Clock

TIMEX Dual Alarm Fm Clock Radio

What'due south in the Box

Controls Overview

Display

Fill-in Battery

Your new Timex Clock includes a congenital-in battery backup system that will maintain the time and alert settings during a temporary power interruption. Remove the battery pull tab located on the lesser of the unit. When the Depression Backup Battery Icon glows on the display, information technology is time to the supplant the fill-in bombardment.

Keep unit of measurement connected to Ac power when replacing the battery, or y'all will lose settings.
Use a Phillips screwdriver to open up the battery backup compartment door located on the lesser of the unit.
Remove exhausted battery and replace with a fresh CR-2032 battery, making sure the '+' side is facing upwards.
Supercede the battery compartment door. Do not overtighten the screw.

Product Intendance

A protective film is fastened to the front of the display. Information technology can exist removed past peeling it off.
Identify the unit of measurement on a level surface abroad from sources of straight sunlight or excessive oestrus.
Protect your furniture when placing your unit on a natural wood and lacquered finish. A textile or other protective cloth should be placed between it and the furniture.
Stronger cleaning agents, such equally Benzene, thinner or similar materials can damage the surface of the unit.

Ready Up

Connecting to Power Source:
Connect the included Ac adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet.

Setting the Time

Press and hold the Fourth dimension Set Push button.
Press and release the Minus Button (-) repeatedly to conform the hour.Press and release the Plus Button (+) repeatedly to adapt the infinitesimal.
Note: The PM indicator will light on the display when the hour is set for PM. In that location is no AM indicator.
Press the Fourth dimension Set Button to confirm settings.

Setting and Using Alarms

Press and concord Alarm Ane OR Alarm Two. Each warning can exist ready in the same manner.
Printing and release the Minus Push (-) as needed to arrange the hour.Printing and release the Plus Button (+) as needed to adjust the infinitesimal.
Press Alarm One or Alarm Two to confirm the alarm fourth dimension.
Annotation: The PM indicator will lite on the display when the hour is set for PM. At that place is no AM indicator.
Press and release the Minus Button (-) or Plus Button (+) to select your wake to source: buzzer or radio. The or icon volition light on the display to confirm your selection.
Printing Alarm 1 or Alarm Ii to confirm settings.

Sleep Manner

Printing the Power/Alert Reset Button to turn on FM radio.
Press and release the Minus Button (-) or Plus Button (+) to select a radio station. (Press and hold to quickly scroll through the stations.)
Printing the Sleep Mode Button repeatedly to select a sleep period between x-90 minutes, or OFF.

Wireless Charging

Supports:

Qi compatible phones (besides works with plastic cases up to 3mm thick)
AirPods with wireless charging case
Place Qi compatible device face on the wireless charging pad as pictured below:

Caution:
Remove metal protective or magnetic case from phone before charging. When charging phone, practice not place magnetic-striped or other metal objects on the charger. Doing so could damage the object or this unit. Qi compatible phones with metallic looking finishes will charge normally

Bank check the Wireless Charging Status LED Indicator to monitor charging status:

Solid green LED: Device is charging.
Rapid blinking bister LED: Device is not charging properly. Reposition device.
Solid bister LED: Device fully charged.
Annotation: The LED indicator may go along to glow solid green when iOS devices are fully charged. The LED indicator may alternating between solid green and flashing bister while charging AirPods.

Charging Devices via USB Port

You tin can also charge your devices via the USB port located on the back of the unit.

To charge devices:

Connect the standard size end of a USB cable (not included) to the USB port on the back of the unit.
Connect the other end to the charging port on your device.
(Make sure the unit is plugged into a working outlet in order to charge devices.)

FM Radio and Presets

Press the Power/Alert Reset Push to turn on FM radio.
Press and release the Minus Push (-) or Plus Button (+) to select a radio station.(Printing and concord to quickly coil through the stations.)

Brand sure the antenna is extended for best reception.
HOW TO Program FM RADIO PRESETS
You can shop upwards to ten FM presets by following these steps:

Press the Power/Warning Reset Push to turn on FM radio.
Press and release the Minus Button (-) or Plus Push (+) to select a radio station. (Press and hold to apace scroll through the stations.)
Printing and hold the Time Set/FM Presets Push. The display will wink.
Press and release the Minus Button (-) or Plus Button (+) to choose a preset position between P01-P10.
Press the Fourth dimension Set/FM Presets Button once more to confirm the preset station.
Repeat steps 2-5 to set up to ten preset stations.
When listening to FM radio, repeatedly press the Time Set/FM Presets Push to access your stored stations.

Troubleshooting

The unit does not power ON.
The unit is not connected to AC outlet, the AC outlet has no power, or is controlled by a wall switch that is "OFF". Check Air conditioning outlet and wall switch.
Warning does not come up on.
The alarm time AM or PM incorrectly set, Warning was OFF, etc. Check alarm settings.
Unit of measurement shuts "Off" unexpectedly.
a. A power surge has occurred, or the AC outlet has been disconnected.
b. The Ac outlet may be controlled by a wall switch that is turned OFF. Check Air conditioning outlet or wall switch.

Important SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and go along these instructions handy for future reference.

Do not use this product near water, and clean only with dry material.
Practice not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Estrus – This production should exist situated away from rut sources such as radiators, estrus registers, stoves or other appliances (including amplifiers) that produce estrus.
Only use attachments/accessories specified by the manufacturer.
Unplug this product during lightning storms or when unused for long periods of time.
Damage Requiring Service – This product should exist serviced past qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit of measurement exhibits a marked change in functioning or does not operate commonly.
No naked flame sources, such as lighted candles, should exist placed on this product.
Attention should be drawn to the environmental aspects of bombardment disposal.
This production is suitable for use in tropical and/or moderate climates.
Warning: To reduce the risk of fire or electrical daze, do not expose this product to pelting or wet.
Do not dispose of batteries in the household trash or burn.
The mains plug of ability adaptor is used equally the disconnect device, information technology shall remain readily operable.

WARNING:

Do not ingest the battery, Chemical Burn Risk. This product contains a coin/push button cell battery. If the coin/push button cell battery is swallowed, it tin can cause severe internal burns in just 2 hours and can pb to death.
Keep new and used batteries away from children. If the bombardment compartment does non close deeply, finish using the production and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention."
Caution – Risk OF EXPLOSION IF BATTERY IS REPLACED By AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environs.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two weather:

This device may not cause harmful interference, and (2) this device must accept whatever interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Annotation: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Function 15 of the FCC Rules.

These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This equipment generates, uses and tin radiate radio frequency free energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Still, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which tin be adamant past turning the equipment off and on, the user is encouraged to endeavor to correct the interference by one or more than of the post-obit measures:

Reorient or relocate the receiving antenna.
Increment the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assist.

This equipment should exist installed and operated with minimum distance 20cm between the radiator & your trunk.

IC Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(southward)/receiver(south) that comply with Innovation, Scientific discipline and Economic Evolution Canada'southward licence-exempt RSS(s).
Operation is subject to the following two conditions:

This device may non cause interference.
This device must take whatever interference, including interference that may cause undesired operation of the device.

The device comply with ISEDC RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modifications not expressly canonical by the political party responsible for compliance could void the user's authority to operate the equipment.

Limited ninety Day Warranty Information

Timex Audio Products, a division of SDI Technologies Inc. (futurity referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal employ and conditions, for a period of ninety (90) days from the appointment of original buy.

Should this product fail to role in a satisfactory manner, it is best to outset return it to the shop where it was originally purchased. Should this fail to resolve the thing and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without accuse. This conclusion is discipline to verification of the defect or malfunction upon commitment of this production to the Factory Service Center authorized by Customer Service.

If service is required, delight visit timexaudio.com/back up for more than information. A copy of the sales receipt is required to validate in-warranty coverage.
Disclaimer of Warranty

NOTE: This warranty is valid only if the production is used for the purpose for which it was designed. It does not cover

products which have been damaged by negligence or willful deportment, misuse or blow, or which have been modified or repaired by unauthorized persons;
cracked or broken cabinets, or units damaged past excessive heat;
impairment to digital media players, CD'south or record cassettes (if applicative);
the cost of shipping this product to the Factory Service Center and its return to the possessor.

Ezoic

This warranty is valid but in the United States of America and does non extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors,shareholders, members or agents exist liable to you or whatsoever tertiary party for whatsoever consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not let limitations on implied warranties or exclusion of consequential damages, and then these restrictions may not apply to you lot.) This warranty gives you specific legal rights, and yous may also take other rights which vary from state to land. Your acquittance and agreement to fully and completely abide past the above mentioned disclaimer of warranty is contractually bounden to you upon your transfer of currency (money order, cashier's check, or credit card) for buy of your SDI production.
© 2022 SDI Technologies, Inc. All rights reserved
Questions? Visit www.timexaudio.com
TIMEX is a registered trademark of Timex Corporation in the Usa and other countries

Documents / Resources

References

Source: https://manuals.plus/timex/dual-alarm-fm-clock-radio-manual